Basic settings
en
25
13.6 Setting the cooking time
1.
Press twice.
a
:
is shown on the display and the time symbols
light up.
2.
Set a cooking time using the rotary selector.
3.
Press .
a
The appliance starts the operation.
a
The cooking time counts down on the display and
lights up. The other time symbols go out.
a
An audible signal sounds once the cooking time
has elapsed. The appliance stops heating. :
is
shown on the display.
4.
Press to stop the signal.
5.
To switch off the appliance, turn the function se-
lector to the zero setting.
13.7 Changing the cooking time
▶
Change the cooking time using the rotary selector.
a
After a few seconds, the display shows the changed
cooking time.
a
You will see the cooking time counting down.
13.8 Clearing the cooking time
Note:
With the timer function set, you must first press
to change the cooking time.
▶
Use the rotary selector to set the cooking time to
: .
a
The appliance applies the change after a few
seconds.
13.9 Setting the time
During initial use, the time display is highlighted. :
flashes on the display and lights up.
1.
Set the time using the rotary selector.
2.
Press .
a
The time is set.
13.10 Changing the time
Requirement:
The appliance is switched off.
1.
Press twice.
a
The display shows and the time.
2.
Set the time using the rotary selector.
3.
Press .
a
The time is set.
Note:
If you do not press after setting the time, the
appliance automatically applies the set value after a
few seconds.
If you have changed the position of the function se-
lector while configuring the settings, you can only use
the appliance once you turn the function selector to the
zero setting.
To reduce the standby consumption of your appliance,
you can hide the clock.
14 Basic settings
You can configure the basic settings for your appliance to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Selection
Description
Signal duration
= short = 10 seconds
= medium = 30 seconds
1
= long = 2 minutes
Set the signal duration for
after a cooking time
elapses or the timer
reaches zero.
Button tone
= off
= on
1
Switch the button tones on
or off.
Display brightness
= low
= medium
1
= high
Set the brightness of the
display.
Time indicator
= off
= on
1
Show the clock time in the
display.
Interior lighting
= off
= on
1
Switch the interior lighting
on or off.
Water hardness
= softened
= soft
= moderate
= hard
= very hard
1
.
1
Factory setting (may vary according to model)
