9
7.
Touch the
m
button in order to apply the settings you have
entered for Step 1.
The oven begins to heat up.
8.
If the oven does not need to be preheated for your dish,
touch the
m
button again while the oven is still cold.
or
If the oven should be preheated for your dish, do not touch
the
m
button until the oven has heated up.
9.
Once the desired cooking time has elapsed (e.g.
50 minutes), push the NeffNavigator® down, select “Add
step” and push down again.
or
Touch the
m
button in order to end the recording of Step 1
(see: Ending and saving).
Add step 2
1.
Scroll the NeffNavigator® if necessary in order to change the
operating mode for “Step 2” (e.g. Full-surface grill), and push
down.
or
Push the NeffNavigator® down in order to retain the
operating mode.
2.
Scroll the NeffNavigator® if necessary in order to change the
temperature for “Step 2”, and push down.
3.
Touch the
m
button in order to apply the inputs for step 2
and start the operating mode.
4.
Once the desired cooking time has elapsed, touch the
m
button in order to end the recording of Step 2 (see:
Ending and saving).
Up to three steps can be recorded. For each step you can
change both the operating mode and the temperature.
Ending and saving
1.
Push the NeffNavigator® down in order to save the
“Record New Programme”.
2.
Push the NeffNavigator® from the front in order to assign a
name (e.g. Lasagne) to the recorded programme.
3.
Push the NeffNavigator® down and select “Correct/Save”
4.
Scroll the NeffNavigator® and select “Save”.
5.
Push in the NeffNavigator® in order to save the programme
under the name entered.
Ending and discarding
1.
Touch the
m
button.
2.
Scroll the NeffNavigator® and select “Discard”.
3.
Push the NeffNavigator® from the front.
Starting the programme
1.
Press and hold the
~
button for 1 second.
2.
Touch the
Y
button.
3.
Push the NeffNavigator® down in order to go to the
“Personal programmes” menu.
4.
Scroll the NeffNavigator® in order to select the saved
programme.
5.
Touch the
m
button.
“Please wait” appears on the display.
6.
When “Insert food” appears in the text display, insert your
food and press the
m
button.
The programme runs. If there are several programme steps,
an audible signal sounds after each step.
7.
Once the programme has elapsed, an audible signal sounds
and the
x
symbol flashes. Press the
7
button.
Displaying and changing the programme steps
You can display and change the settings for the various
programme steps.
1.
Touch the
Y
button.
2.
Press NeffNavigator® down.
3.
Scroll the NeffNavigator® until the desired programme is
selected, and push down.
4.
Scroll the NeffNavigator® in order to select the step to be
changed, and push down.
5.
Scroll the NeffNavigator® and select "Temperature" or
"Cooking time", and push down.
6.
Scroll the NeffNavigator® in order to change the value.
7.
Push the NeffNavigator® down to apply the change.
Deleting a personal programme
1.
Touch the
Y
button.
2.
Press NeffNavigator® down.
3.
Scroll the NeffNavigator® in order to select
“Delete programme”, and push down.
4.
Scroll the NeffNavigator® in order to select the programme
to be deleted.
5.
Press in the NeffNavigator® in order to confirm the deletion.
Deleted programmes cannot be restored.
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off.
1.
Touch the
²
button for 3 seconds in order to go to the Basic
settings menu.
2.
Scroll the NeffNavigator® in order to select the desired
submenu, and push down.
3.
Scroll the NeffNavigator® in order to select the desired basic
setting, and push down.
4.
Touch the
²
button in order to exit the Basic settings menu.
Assigning a name
NeffNavigator®
Select characters
Scroll
Apply characters
Press in
Correct characters
Push the NeffNavigator® down and
select “Correct”
Press the NeffNavigator® from the front
to cancel a character
&
3UHVVVWDUWWRUHFRUG
&LUFR7KHUP
$GGVWHS
&LUFR7KHUP
&
HDGEDNLQJ
7RSERWWR
