8
Notes
■
The EasyClean® and Dough proving operating modes can
only be started when the appliance has cooled down.
■
You can only start low-temperature cooking if neither
“Residual heat high” nor “Residual heat low” is shown in the
text display.
■
Steam cooking can only be started when the cooking
compartment has cooled down or “Residual heat low”
appears in the text display.
■
If no default temperature is displayed, the temperature of your
selected operating mode is a fixed setting. You cannot
change this temperature.
Current temperature
While the oven is heating up, touch the
²
button. The current
temperature is shown for as long as you touch the button.
If no current temperature appears in the text display, the
appliance is heated up.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (fig. A)
■
Appliance reheating (fig. B)
Changing the operating mode
Changing the operating mode while the appliance is in
operation.
1.
Touch the
m
button.
2.
Scroll the NeffNavigator® in order to select the desired
operating mode.
or
Touch the
3
,
%
or
(
button in order to select the operating
mode directly.
3.
Touch the
m
button.
The appliance applies the set operating mode.
Changing the temperature
Changing the temperature while the appliance is in operation.
1.
Touch the
[
button.
or
Press NeffNavigator® down.
2.
Scroll the NeffNavigator® until the desired temperature is
selected.
Your setting is accepted after 3 seconds.
Switching off the appliance
Press and hold the
~
button for 2 seconds.
The appliance is switched off.
Rapid heat up
You can reduce the preheat time for the CircoTherm® or
Bread-baking operating modes if the set temperature is higher
than 100° C.
Note:
During rapid heat up, do not place any food in the
cooking compartment while the
f
button is illuminated.
1.
Set the operating mode and temperature, and start.
2.
Touch the
R
button.
The
R
button lights up and “Rapid heat up” appears in the
text display.
After reaching the set temperature, rapid heat up switches off.
The
R
button and “Rapid heat up“ go out in the text display
and a signal sounds.
Cancelling rapid heat up
Touch the
R
button. The
R
button and “Rapid heat up“ go out
in the text display.
Personal programmes
The appliance offers you the option to record, save and play
back personal programmes. In your personal programme, you
can record the cooking process for elaborate food or your
favourite dishes in programme steps, e.g. for lasagne:
Step 1: 50 minutes with CircoTherm® at 160 °C
Step 2: 5 minutes on full-surface grill at 275 °C
A maximum of 25 personal programmes can be saved.
Recording
Only begin the recording when the cooking compartment is
cold. The recording must be at least one minute long in order
for it to be saved.
1.
Press and hold the
~
button for 1 second.
2.
Touch the
Y
button.
3.
Push the NeffNavigator® down in order to go to the
“Personal programmes” menu.
4.
Push the NeffNavigator® down in order to select
“New programme”.
5.
Scroll the NeffNavigator® in order to select the operating
mode for “New programme step 1” (e.g. CircoTherm), and
push down.
6.
Scroll the NeffNavigator® if necessary in order to change the
default temperature for “Step 1” (e.g. 160 °C).
Operating mode
Default
temperature in
°C
Temperature
range in °C
CircoTherm®
160
40 - 200
Defrost setting
Fixed setting
Top/bottom heat
170
50 - 275
Circotherm intensive
220
50 - 275
Bread-baking
200
180 - 220
Bottom heat
200
50 - 225
Circo-roasting
170
50 - 250
Full-surface grill
220
50 - 275
Full-surface grill
(intensive)*
Fixed setting
Centre-area grill
180
50 - 275
Centre-area grill
(intensive)*
Fixed setting
Low-temperature cooking Fixed setting
Steam cooking
Fixed setting
Dough proving
Fixed setting
Plate warming
Fixed setting
Keep warm
85
60 - 120
Sabbath programme
Fixed setting
Oven cleaning
Fixed setting
Oven lighting
Fixed setting
* Increase the temperature to over 275 °C until “Intensive”
appears in the text display.
$
%
