General Information
®
The following pages will tell you everything about the correct connection of your
SeatQuake
System MK-II.
Please follow these instructions step by step to make the connection as easy as possible.
Please note:
To make sure the system can be connected and operated with many
differend audio sources, the amplifier has been equipped with a high
input sensitivity.
Therefore:
Be CAREFUL with the amplifier‘s LEVEL control!
Always start with a low setting and adjust the power to your audio signal slowly.
Music, movies as well as games are often mixed differently when it comes
to their bass range.
®
In case the
SeatQuake
vibration unit becomes
hot
during operation or the
protection circuit has been triggered, make sure to lower the LEVEL control!
Any damages to the system caused by overloading are not covered
by warranty!
Setting up the SQ-AMP MK-II amplifier
The amplifier should be in reach of your seat.
You should be able to reach the LEVEL control easily.
The amplifier will heat during operation. This is normal. Allow adequate ventilation and make sure
the amplifier isn‘t covered by other objects.
Putting the system in an additional housing, drawers, cupboards or other poorly ventilated places
while operating is forbidden!
Provided cables should suffice for setting up the system properly. In case you are in need of longer
cables you can find them in a well-assorted electronic market. In case of doubt feel free to get in
touch with us, we‘ll be happy to help.
PAGE 4
