Operating Instructions
X-Liner 2
10
4 Structure of the Instrument
EN
Unit ON/OFF switch and pendulum locking device
Position 1
1
The pendulum locking device is locked.
The self-levelling is disabled and the LED
(4) on the keypad lights up red if the laser
beam is switched on.
Position 2
1
The pendulum locking device is unlocked.
The self-levelling is enabled and the LED
(4) on the keypad lights up green if the
laser beam is switched on.
ON/OFF or rather selection button and LED
display
1
PULS button
Switches the laser to PULS mode for use of a
laser receiver.
2
LED display above PULS button
"OFF": Pulse mode is switched off.
"BLUE": Pulse mode is switched on.
3
ON/OFF button
Switches the laser beam on and on/off in the
relevant order:
Press 1x: Switch on unit,
Horizontal laser beam (H)
Press 2x: Vertical laser beam (V)
Press 3x: Horizontal (H) and vertical (V) laser
beam
To switch the unit back off again, press the
ON/OFF button
for longer than 3 secs.
4
LED display above ON/OFF button
"RED" : Unit switch in position 1.
"GREEN": Unit switch in position 2.
If the battery charge is weak the LED display (4)
above the ON/OFF button (3) begins to flash. If
the batteries are too weak the laser switches off.
1
2
3
4
1
www.rusgeocom.ru
