Nedo TUBUS 2, Руководство по эксплуатации

Страница: 18 / 24

18
EN Operating Instructions
7 Adjusting the Tilt
7.1 Adjusting the tilt in automatic mode
Button Description
Press the TILT/OK button to change the tilt.
The angle symbol and the sign flash.
Use the UP/DOWN arrow buttons to change the sign
or to set the required numerical value within the
range from 1 to 9.
The numerical value selected can be reset to “0” by
pressing the two buttons at the same time.
Use the RIGHT/LEFT arrow buttons to switch
between the individual decimal places.
The tilt value can be reset to „00.000” by pressing the
two buttons at the same time.
To confirm the set value, press the TILT/OK button.
7.2 Plumb function
The TUBUS 2 remote control can be used to manually adjust the laser beam
vertically. This function can be used to align the laser beam with a target mark
above the pipe. After exiting the plumb function the laser beam returns to the
previously set tilt!
Button Description
To change the tilt manually, press the MANUAL but-
ton. A hand symbol appears in the display and the tilt
value flashes.
The UP/DOWN arrow buttons can now be used to
set or adjust the tilt value. To do this, either press the
respective button briefly or keep it pressed.
Press the MANUAL button again to return to the
previously set tilt value. The laser resets the previous
value, manual mode is ended.