13
EN Operating Instructions
1 Remove the rubber cover from the
charging socket.
2 Connect the adapter cable supplied to
connect both units to the charger at the
same time.
3 Connect the cable in the charging
socket of the unit.
4 Connect the charger to the mains sup-
ply.
Note voltage! (110-230 V)
Charging time if battery empty and for
complete charging: 3-4 h.
After charging, always use the rubber
cover (1) to close off the charging socket.
NOTE
f
The units do not charge at temperatures below 5 °C and above 45 °C.
1
3
4
1
3
4
4.1 Charging the battery
4 Initial start up TUBUS 2
CAUTION!
f
The typical design life of Li-ion cells and thus the EOL is 5 years at 20 °C ambi-
ent temperature or in case of a storage capacity of only 70% or less of the initial
capacity.
f
We recommend having the battery replaced by a service technician after 5 years or
if the residual capacity is 70%.
f
During charging, the red charging LED
lights up on the control panel.
f
The red LED goes out if the battery is
fully charged.
f
The laser can be operated during charg-
ing
2
3
4
5
1
1
Содержание TUBUS 2
Страница 1: ...EN Operating Instruction...