Nedo TUBUS 2, Руководство по эксплуатации

Страница: 17 / 24

17
EN Operating Instructions
5.6 Additional button functions of the TUBUS 2 remote control
No. Button Description
8
BUTTON Tilt input / OK
The same function as for TUBUS 2 (for functions,
see table on page 15)
11
Manual mode
Activate / deactivate manual mode. Laser beam can be set and
adjusted using the UP/DOWN/RIGHT/LEFT arrow buttons.
11
Keypad lock
Press the button for approx. 3 sec. to activate / deactivate the
keypad lock.
12
Sleep mode
Press the button for approx. 3 sec. to activate / deactivate
laser sleep mode.
6 Startup
Press the ON/OFF button (4) to switch on the laser.
The following displays appear consecutively:
NOTE
The laser‘s display indicates possible problems, which result due to setting up of the
unit
ĺ
see Error Messages / Displays chapter!
-> ->
Company logo
Sand timer, unit
references itself
Display ready
6.1 Switching on the TUBUS 2 Pipe laser
6.2 Aligning the TUBUS 2 Pipe laser
The laser shows a tilt level in the bottom area of the display.
Position the laser so that the tilt level is aligned with the middle.