59
EN Operating Instructions
13 Laser receiver COMMANDER 2 HVA2N
13.1 Displays and controls of the laser receiver
(4)
(3)
(2)
9
10
11
1
LCD display BATTERY
Display lights up: limited remaining life
(battery approx. 5h / rechargeable
2
LCD display LOWER
Lights up if the laser line is within the sensor win-
dow but below the zero line. In addition, the red
LED next to the reception field lights up and also a
slow melody sounds.
3
LCD display TARGET
Lights up if the laser line is located at the level of
the zero line. In addition, the green LED next to the
reception field lights up and a
continuous melody sounds.
4
LCD Display HIGHER
Lights up if the laser line is within the sensor win-
dow but above the zero line. In addition, the yellow
LED next to the reception field lights up and also a
fast melody sounds.
5
LCD display DETECTOR FIELD RESOLUTION
Displays the currently set resolution:
4=±4mm / 2=±2mm / 1=±1mm / 0=±0.5mm
6
LCD display ACOUSTIC SIGNAL
Display = acoustic signal loud/
Display = acoustic signal quiet/
No Display = acoustic signal off
7
LCD display „mm/in“
Shows the selected unit.
To toggle between units, press buttons 9+11
simultaneously
8
LCD display “height”
Shows the distance to the reference / zero marking
9
Button DETECTOR FIELD RESOLUTION
Switches the resolution between
±4mm / ±2mm / ±1mm / ±0.5mm.
10
Button ACOUSTIC SIGNAL
Switches the acoustic signal between
loud/quiet/off.
11
Button ON/OFF
Switches the receiver on and off.
2
3
4
6
5
1
8
7
