5
•
Allow the product to cool down.
•
If the power cable is damaged, it must be replaced by a special
cable or assembly available from the manufacturer or its service
agent.
•
Unplug the product when not in use and before cleaning.
•
Only handle the product with dry hands. Handling with wet
hands might cause an electric shock.
•
Close supervision is necessary when the product is used by or
near children, animals or infirm persons.
•
Do not use the product near explosive or flammable materials.
•
Always unwind the power cable before using the product.
•
Do not let the power cable touch hot surfaces.
•
Only use the product in the upright position.
•
Keep the air inlet grill clean.
•
Do not use the product without the feet attached.
•
Cleaning and user maintenance shall not be done by children
under the age of 8 and without supervision.
•
Children of less than 3 years should be kept away unless
continuously supervised.
•
Children aged from 3 years and less than 8 years shall only switch
on/off the product provided that it has been placed or installed
in its intended normal operating position and they have been
given supervision or instruction concerning use of the product in
a safe way and understand the hazards involved.
Installing the feet
(image B)
1. Place the product upside down.
2. Place the feet
A
i
on the product.
3. Align the holes in the feet with the holes in the bottom of the
product.
4. Attach the feet to the product with the screws
A
u
using a
screwdriver.
5. Place the product upright.
Insert or change battery
(image C)
1. Open the battery compartment
A
e
.
2. Place the battery
3. Close
A
e
.
Switching on the product
-
Do not use the product without the feet attached.
4
See “Installation” for instructions on how to attach the feet.
1. Plug the power cable
A
y
into the power outlet.
2. Press the on/off switch
A
t
to switch on the product.
The product is now in standby mode.
4
You hear a click when you switch on the product.
4
When the product is switched on (after a long period of time),
the product may emit some smell and fumes.
3. Press the on/off button
A
9
to switch between standby and on.
4
You can control the product with the remote control and the
buttons on the side of the display.
4
The display
A
2
switches on.
Display
(image D)
The display shows the following:
1
Power setting
2
Fan mode
3
Anti-frost mode
4
Current room temperature
5
Measurement unit
6
Countdown timer
7
Set room temperature
4
The display shows the current room temperature when the
product is in standby mode.
Switching between power settings
1. Press mode button
A
3
to switch between power settings.
2. Choose between:
•
750 W
•
1250 W
•
2000 W
•
Anti-frost mode
4
D
1
shows the current heating level.
Anti-frost mode
•
When the product is set to anti-frost mode, the product switches
on when the room temperature reaches below 5°C to avoid
freezing temperatures.
•
If the room temperature reaches 9°C, the product switches back
to standby.
4
When anti-frost mode is activated,
D
3
is visible on the display.
Setting the timer
1. Press the timer button
A
q
to set a countdown timer.
2. Press
A
q
to increase the timer with 1 hour.
4
The maximum countdown time is 24 hours.
3. Switch off the timer by pressing
A
q
once more when the time
is set to maximum.
4
The timer is cancelled when the product is switched off.
4
The time starts counting down 5 seconds after you set the timer.
4
The product switches back to standby mode when the selected
time has expired.
4
D
6
shows the remaining time.
Setting the temperature
Press the temperature up and down buttons
A
68
to adjust the
set room temperature.
4
D
4
shows the current room temperature.
4
D
7
shows the set room temperature.
Setting the measurement unit
Press the measurement unit button
A
5
to switch between units.
4
Choose between °C or °F.
4
D
5
shows the current measurement unit.
Switching on/off the fan
1. Press the fan button
A
4
to switch on the fan.
The fan mode indicator
D
2
on the display shows to indicate the
fan mode is activated.
2. Press
A
4
to switch off the fan.
Switching off the product
1. Press
A
9
to switch the product to standby mode.
2. Press
A
t
to switch off the product.
3. Unplug
A
y
from the power outlet.
c
Kurzanleitung
Konvektionsheizung
HTCO50FWT
Weitere Informationen finden Sie in der
erweiterten Anleitung online:
ned.is/htco50fwt
Bestimmungsgemäße Verwendung
Die Nedis HTCO50FWT ist eine Heizung, die dem Benutzer die
Kontrolle der Umgebungstemperatur ermöglicht.
Dieses Produkt ist nur für gut isolierte Räume oder für den
gelegentlichen Gebrauch geeignet.
Das Produkt ist nur zur Verwendung innerhalb von Gebäuden
gedacht.
Jegliche Modifikation des Produkts kann Folgen für die Sicherheit,
Garantie und ordnungsgemäße Funktionalität haben.