Nederman NOM 4, Руководство пользователя

Страница: 11 / 78

NOM 4
1 Preface
Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and
developer of products and solutions for the environ-
mental technology sector. Our innovative products
will filter, clean and recycle in the most demanding of
environments. Nederman's products and solutions will
help you improve your productivity, reduce costs and
also reduce the impact on the environment from in-
dustrial processes.
Read all product documentation and the product iden-
tification plate carefully before installation, use, and
service of this product. Replace documentation imme-
diately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements
of relevant EC directives. To maintain this status, all
installation, maintenance, and repair is to be done
by qualified personnel using only Nederman original
spare parts and accessories. Contact the nearest au-
thorized distributor or Nederman for advice on tech-
nical service and obtaining spare parts. If there are
any damaged or missing parts when the product is de-
livered, notify the carrier and the local Nederman rep-
resentative immediately.
2 Safety
2.1 Classification of important informa-
tion
This document contains important information that
is presented either as a warning, caution or note, ac-
cording to the following examples:
WARNING! Risk of personal injury
Warnings indicate a potential hazard to the
health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage
Cautions indicate a potential hazard to the
product but not to personnel, and how that
hazard may be avoided.
NOTE!
Notes contain other information that is import-
ant for personnel.
2.2 General safety instructions
NOTE!
For reasons of safety, this manual must be
studied before using the product for the first
time.
Never start the unit before installation is complete.
WARNING! Risk of personal injury
• Always stop the unit before looking into the
outlet. The pump rotates at high speed and
even small particles of dust could severely
damage the eyes.
• Ensure the dust collector is attached to the
unit’s inlet and the silencer attached to the
outlet. Suction at the inlet is very powerful
and any contact with the pump lobe could
result in severe injury.
• The belt guard must always be in place ex-
cept during maintenance work on the trans-
mission. Maintenance must be undertaken by
qualified personnel. Refit the guard when the
work is finished. The figures in this manual
without the guard in place are for illustration
purposes only and do not imply that the unit
ever is to be run without the guard.
• The thermal switches in the unit must always
be enabled. Switch off and lock the mains
maintenance switch or remove the mains
fuses before starting the maintenance.
• The exhaust air and pipes, motor, pump and
silencer will sometimes get very hot.
CAUTION! Risk of equipment damage
The dust collector must be positioned before
the vacuum unit and be designed and main-
tained to prevent coarse particles and dust
from being sucked into the pump. Filtering of
fine dust should be sufficient to prevent undue
wear to the pump. The unit must be stopped
immediately for inspection by suitably quali-
fied personnel if the pump rotates unevenly,
or if damage to the pump or its bearings is sus-
pected.
3 Description
3.1 Dimensions
See Figure 1 .
3.2 Area of application
The filter must only be used with oil vapour. Other
applications must be referred to the manufacturer.
Should materials containing graphite, lead or chrome
be used, the filters may have to be replaced more fre-
quently.
WARNING! Risk of fire or explosion
Do not use the filter unit to separate explosive
or fire dangerous substances.
EN
11