Nederman NEX D 2m, Руководство по обслуживанию

Страница: 12 / 42

NEX D/DX EN
12
C3. Remove the below.
C4. Loosen the two socket head cap screws.
C5. Tighten the ball joint using two adjustable spanners.
C6. Remount the ball joint at the hood and test the hood movement. If
necessary tighten the ball joint still more.
C7. Tighten the two socket head cap screws.
C8. Unscrew the ball joint from the hood. Refit the below. Fasten the
bellow at the outer arm cover. Fasten the ball joint at the hood.
4 Spare parts
Installation, repair and maintenance work is to be carried out by qualified
personnel using only original Nederman spare parts. Contact your nearest
authorized distributor or Nederman for advice on technical service.
Ordering spare parts
When ordering spare parts always state the following:
• Part number and control number (see the product identification plate).
• Detail number and name of the spare part (see www.nederman.com).
• Quantity of the parts required.
5 Recycling
The product has been designed for component materials to be recycled.
Its different material types must be handled according to relevant local
regulations. Contact the distributor or Nederman if uncertainties arise when
scrapping the product at the end of its service life.