Nederman FlexPAK 800, Инструкция по установке и обслуживанию

Страница: 24 / 34

FlexPAK 800/1000 EN
24
6.7.1 Frequency converter control panel
To change software or install new software for the unit, the parameters in the frequency
converter have to be changed by means of the frequency converter control panel available
from Nederman.
6.7.2 Firmware and software labelling
NOTE!
The software version is found on a label taped to the front of the PLC. LOGO 8
software is updated using an SD Card. Follow the included instructions when the software
needs to be updated.
NOTE! To find the firmware and software revision number in the PLC display, see Figure
8,
item 1
. Pressing ‘OK’ when the PLC displays this menu will show this information. See also
the PLC Settings Manual.
The firmware and software revision can be read in the PLC and also on the label on the
PLC.
The number, 2155264-2-EN for example, consists of the following parts:
•
2155624 = The software number.
•
2 = The revision.
• EN = The language of the display text.
6.7.3 Upgrading the system
LOGO 8 software is updated using an SD Card. Carefully follow the included instructions
when the software needs to be updated.
6.8 Spare parts
CAUTION! Risk of equipment damage.
Use only Nederman original spare parts and accessories.
Contact your nearest authorized distributor or Nederman for advice on technical service or
if you require help with spare parts. See also www.nederman.com.
Ordering spare parts
When ordering spare parts always state the following:
•
Part number and control number (see the product identification plate).
•
Detail number and name of the spare part (see www.nederman.com).
•
Quantity of the parts required.
6.9 Recycling
The product has been designed for component materials to be recycled. Its different
material types must be handled according to relevant local regulations. Contact the
distributor or Nederman if uncertainties arise when scrapping the product at the end of its
service life.
6.9.1 Environmental information
The following environmental information is valid for FlexPAK 800/1000:
• Cadmium-free and halogen-free relays in the control equipment.
•
Solvent-free washing and lacquer.
•
93.6% recyclable.
•
An environmental goods declaration is available on request.