Nederman FilterMax DX 3000, Инструкция по эксплуатации

Страница: 8 / 37

8
MOUNTING THE FILTER CARTRIDGES
1.
Unscrew the two fixing screws on the
access door. Use the enclosed T-key or a 10 mm
standard hexagon key. Open the door.
3.
Handle the filter cartridges carefully to
avoid mechanical damage to the filter surface.
5.
Hang the filter holders
on the screws.
7.
Fasten the nuts.
8.
Shut the access door and
fasten the two fixing screws.
2.
Loosen the nuts
on the filter holders.
Remove the filter
holders.
4.
Insert the new filter
cartridges. NB! The mark
on the back end cap
should be put on the
angled sheet-metal plate
just inside the filter hole.
6.
Connect the earth plate
on 2 places as shown in
the picture.
NB! Toothed washers
must be used to ensure
the earth connection.
WARNING!
Risk of personal injury!
For FilterMax DX equipped with 2 or 3 modules
(12 or 18 filter cartridges), an approved lifting
platform (see figure) has to be used when
mounting or replacing the filter cartridges.