S-SERIES
Nederman Customer Service & Technical Support
7
Section 4.0 Pre-Installation
4.3
Offloading:
The dust collection unit is shipped with the bag house roof (lowered), hopper section and fan pre-
assembled. The unit should be offloaded and moved with a forklift truck having a minimum 65”
(1.65 m) long forks. It is further recommended that the unit be set directly from the truck to the
pad or piers upon which it will be installed (see page 11 for specific instructions).
4.4 Required Equipment:
•
Forklift Truck (a minimum of 65” (1.65 m) long forks required)
•
Screwdriver
•
Socket wrenches, metric sizes (or adjustable wrenches)
4.5 Storage Procedures:
If the unit cannot be installed immediately, the dust collector components should be stored as
follows:
•
Motor Starter: Store indoors in a temperature and humidity controlled environment.
•
Filter Hopper, Filter Top, and Fan Assemblies: Store off of the ground with all external
cavities covered to prevent collection of water.
•
Ducting components shipped in boxes: Store indoors, if possible.
The dust collector is intended to be located indoors. If the unit cannot be stored inside
immediately, it is recommended that the unit be covered with a tarp or like material in such a way
that the unit is not exposed to the outdoor elements/weather.
Exposure to outdoor elements can cause galvanic corrosion affecting the
aesthetics of the unit.
NOTICE
NOTICE
NOTICE
