S-SERIES
Nederman Customer Service & Technical Support
15
Section 8.0 Maintenance
Before performing any service or maintenance work on this equipment,
the safety procedure and warnings listed below must be followed.
1.
Disconnect all power supplies.
NOTE: Equipment may have more than one power supply to disconnect.
2.
Lockout-Tag out all disconnected power supplies to prevent equipment being turned
on while work is being performed.
3.
Personnel accessing the dust compartment must wear proper PPE including breathing
equipment and eye protection.
4.
When working overhead or in a storage silo, proper supports must be in place to
prevent collapse of material above or below the working area.
5.
When working overhead or in a storage silo, personnel must wear safety belts with
properly attached lifelines.
6.
Once service or maintenance is completed, reinstall and safety guards before starting
the dust collector
WARNING