Booster | installation guide
9/25
4.3
How to create a configuration card
The configuration cards are created using the NEDAP Smartcard-Booster configuration software. This software can be
downloaded from our partner portal;
https://portal.nedapidentification.com
Figure 2: Smartcard-Booster configuration software
4.3.1
Target device
The Smartcard-Booster Configuration software is typically used to configure the Smartcard-Booster. However it also
supports some older (no longer available) booster models. The user-interface is adapted to the selected target device.
Select in the ‘Target’ menu which booster model you are about to configure.
•
Smartcard-Booster
•
Transition Booster (old)
not covered in this manual
•
Prox Booster EM4x50 / Titan (old)
not covered in this manual
4.3.2
Creation procedure
Follow the procedure below to create a configuration card with application specific settings.
1.
Specify BOOSTER OPTIONS
see chapter 4.3.3.
2.
Specify CARD READ SETTINGS
see chapter 4.3.4.
3.
Write the configuration into a config card
see chapter 4.4.
4.
Save the configuration settings into a file
see chapter 4.6.
See next chapters for more details.
