Booster | installation guide
18/25
4.5
Testing the configuration
The Mifare and Desfire settings can be tested before loading it into the Smartcard-Booster using a supported reader.
From the ‘Programmer' menu choose ‘Test configuration’.
Place the user card (not the config card) on the reader and click the ‘Read’ button.
The reader reads the card according to the current configuration settings.
The software displays the driver-id number as it will be read by the Smartcard-Booster.
Figure 4: Configuration test
If the card is not read or if the wrong data is shown under Driver-ID then check if the configuration settings are correct.
Remember that only Mifare and Desfire cards can be tested this way.
4.6
Configuration files
Your configuration can be saved into a so-called Smartcard Booster Config File (*.sbcf).
These files contain all the configuration settings as you have defined them.
The file itself is encrypted to ensure that the configuration data remains secret.
Saved Config Files can be easily opened from within the File menu.
Obviously, the configured keys are not shown after file read back.
