Booster | installation guide
7/25
3.2.2
Single ID mode (only Driver ID)
The Booster is inactive until the driver inserts his personal ID card and pushes the Booster’s button. Once the button is
pushed the Booster reads the personal ID card and beeps upon a successful read. The data is transmitted to the reader
for 5 seconds. After that the Booster automatically deactivates again. Always-on-mode is not supported in single-ID
mode.
Example
driver-id = 871111111117100944:
If 'Extended-length (default)' is configured, the following message is transmitted to the host:
TXD =
Z00000000000000871111111117100944
P
C
PR
R
RP
L
PR
F
R
If 'Standard-length' is configured, the following message is transmitted to the host:
TXD =
U00871111111117100944
P
C
PR
R
RP
L
PR
F
Event identifier ('Z' or 'U').
Driver-id (20 or 32 digits).
