Nedap PowerRouter PR50SB-PR/S24, Руководство по установке

Страница: 31 / 52

PowerRouter • Back-up / Stand-alone • Installation Manual 4 Installation
29
EN
14. Wait untill the grid is connect and the frequency lower trip test starts.
15. Wait untill the test is finished (
Selftest OK
or
Selftest fail
).
16. Press
yes
to continue.
17. Wait untill the grid is connect and the frequency upper trip test starts.
18. Wait untill the test is finished (
Selftest OK
or
Selftest fail
).
19. Press
yes
to continue.
20. The display should show
Selftest passed.
Press
yes
to continue.
CAUTION
If the test is cancelled the PowerRouter reacts as if the selftest failed.
i
If the PowerRouter switches off during the selftest, or the display shows an error, restart the PowerRouter
and redo the test. If the selftest failes the second time contact your local Bussiness Partner.
4.14 Connect the PowerRouter to the internet
CAUTION
Install the clip-on coil on the UTP cable within 10 cm of the powerrouter.
4.14.1 Connect to an internet router
An example of a connection is shown in figure 11. The PowerRouter can be connected to any of the
available ports. The numbers in the drawing are:
1.
Internet Router.
2. Connected computers.
3. CAT5e UTP cable.
4. PowerRouter.
5. ADSL, ISDN, or cable connection.
6. Power adapter for the internet router.
4.14.2 Connect via a switch to an internet router
An example of a connection is shown in figure 12. The PowerRouter can be connected to any of the
available ports of the switch. The numbers in the drawing are:
1.
Internet Router.
2. CAT5e UTP cable.
3. Ethernet switch.
4. PowerRouter.
5. Connected computers.
6. Internet modem.
7. ADSL, ISDN, or cable connection.
8. Power adapter for the internet router.