LEGIC Boosters | installation guide
11/18
3.3.2
Example configuration
In this chapter will be explained how to setup the configuration to accept LEGIC transponders with a Kaba Group
Header segment.
Operating Mode
Operating mode
Dual-ID
Vehicle-ID and driver-ID.
Extended Driver-ID length
no
not used
RFID Options
Enable ISO15693
yes
LEGIC Advant enabled
Enable ISO14443A
no
not used
Enable LEGIC prime
yes
LEGIC prime enabled
Enable Inside Contactless
no
not used
Enable FeliCa
no
not used
Enable ISO14443B
no
not used
Search Definition
Search enable
With segment search
Search for a segment.
Segment number
1
Start searching at segment 1.
Segment type
Data segment
Segment must be a data segment.
Segment stamp search
02
Segment stamp should start with 02.
Stamp length
4
KGH defines a stamp length of 4 bytes.
Data Definition
Allocation of data to search definition
1
Allocate data to search definition 1.
Data type
Segment data
Read data from the searched segment.
Data address
0
Start reading at first byte after the stamp.
Data length
3
Read 3 bytes.
3.3.3
Booster config files
Your configuration can be saved into a Booster Config File (*.bcf). These files contain all the configuration settings as
you have defined them. Saved Booster Config Files can be easily opened from within the File menu.
