LEGIC Boosters | installation guide
9/18
Operating mode
Operating modes:
Dual-ID (Vehicle-ID + Driver-ID)
Driver-ID max. 40 bits (=5 bytes) from LEGIC smart card.
Single-ID (only Driver-ID)
Driver-ID max. 80 (=10 bytes) bits from LEGIC smart card.
Extended Driver-ID operating modes:
Dual-ID (Vehicle-ID + Driver-ID)
Driver-ID max. 88 bits (=11 bytes) from LEGIC smart card.
Single-ID (only Driver-ID)
Driver-ID max. 128 bits (=16 bytes) from LEGIC smart card.
RFID Options
Enable ISO15693
Enables reading LEGIC Advant / ISO15693 cards.
Enable ISO14443A
Enables reading ISO14443A cards.
Enable LEGIC prime
Enables reading LEGIC Prime cards.
Enable Inside Contactless
Enables reading Inside Contactless cards (UID only).
Enable FeliCa *
Enables reading Sony Felica cards (UID only).
Enable ISO14443B *
Enables reading ISO14443B cards.
* Requires LEGIC Booster 2G or LEGIC Booster Ultimate
Search definitions
Specify what to search for on the LEGIC card. Up to 3 search definitions can be specified. If no match is found on search
definition 1, then it will search for the second.
Search enable
Search enable:
+ Disabled
+ No authentication
+ With segment search
Segment number
Start segment number for searching with segment search stamp.
First segment is segment number 1.
Segment type
Segment type to be read.
+ Any segment type
+ Data segment
+ Access segment
Segment stamp search
Search string to search a segment with a specific stamp.
Stamp length (prime only)
Stamp length for access to LEGIC prime transponders. This parameter is
not used with LEGIC Advant transponders.
Data definitions
Specify which data to read. Up to 3 data definitions can be defined (A, B and C). These data definitions can be allocated
to one or more search definitions.
Please make sure that the total length of the data does not exceed the maximum (depending upon the operating mode
selected in Options). The total data length is determined by the data type, data length, constant data for all allocated
data definitions. When the data length for the search definition exceeds the maximum the data will be truncated.
Allocation of data to search definition
Allocate the data definition to one or more search definitions. It is also
possible to have more than one data definition allocated to the same
search definition.
