Installation and Configuration |
AEOS Blue and vehicle identification
EN
Manual version
3
38/48
9.
Right-click the StandardDoor AEbc, and click Properties.
10.
Set the Primary Identifier type to Generic
▼
, and adjust the Input Settings parameters as
shown below:
Input Settings Value
AEserver Settings
Value
Sub type
0
Identification type
AlphaNumeric
Data type filter
Cleared
Identifier length
0
Format
Ascii-AlphaNumeric
▼
Identifier minimum value
Badge number
Identifier maximum value
Bit position
0
Sub type
0
Length
0 bytes
Customer code type
AlphaNumeric
Customer code
Customer code length
0
Fixed code
Cleared
Format
Ascii-AlphaNumeric
▼
Bit position
0
Length
0 bytes
Target Identifier
Type
Generic
▼
Reverse bytes
Cleared
The identifier type settings must match the settings in AEOS, see section 5.4.
11.
Press CTRL+E and click Yes to deploy the configuration.
12.
Close AEmon.
Configuration example
