NED
XCM6040SAT2 UME-0027-03
2
For Customers in the U.S.A.
This equipment has been tested and found to comply with the limits for a
Class A digital device, in accordance with Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to
correct the interference at his or her own expense.
For Customers in the EU
This equipment has been tested and found to comply with the essential
requirements of the EMC Directive 2004/108/EC, based on the following
specifications applied:
EU Harmonised Standards
EN55011:2009+A1:2010 Group1 Class A
EN61000-6-2:2005
*Group 1 contains all ISM (Industrial, Scientific and medical) equipment in
which there is intentionally generated and/or used conductively coupled
radio-frequency energy which is necessary for the internal functioning of the
Equipment itself.
*Class A equipment is equipment suitable for use in all establishments other
than domestic and those directly connected to a low voltage power supply
network which supplies buildings used for domestic purposes.
Directive on Waste Electrical and Electronic Equipment (WEEE)
Please return all End of Life NED products to the distributor from whom the
product was purchased for adequate recycling and / or disposal. All costs of
returning the Product to NED are borne by the shipper.
