NED XCM40170DLMT2CXP Скачать руководство пользователя страница 3

Страница: 3 / 63

NED

UME-0064-01

XCM40170DLMT2CXP

Introduction

Thank you for purchasing NED’s Line Scan Camera. We look forward to your continued

custom in the future.

For safety use

For your protection, please read these safety instructions completely before operating the

product and keep this manual for future reference.

The following symbols appear next to important information regarding safe product handling.

Warning

If the product is not handled properly, this may result in serious
injury or possible death.

Caution

If the product is not handled properly, this may result in
physical injury or cause property damage.

Safety precaution

Warning

Never disassemble or modify this product, unless otherwise specified to do so in this

manual.

When hands are wet, avoid handling this product and do not touch any of the connection

cable pins or other metallic components.

Do not operate this product in an environment that is exposed to rain or other severe

external elements, hazardous gases or chemicals.

If the product is not to be used for an extended period of time, as a safety precaution, always

unplug the connection cable from the camera unit.

If the product installation or inspection must be executed in an overhead location, please

take the necessary measures to prevent the camera unit and its components from
accidentally falling to the ground.

If smoke, an abnormal odor or strange noise is emitted from the camera unit, first turn OFF

power, then unplug the cable from the camera unit.

This product is not intended for use in a system configuration built for critical applications.

Содержание XCM40170DLMT2CXP
































































Результаты поиска

Содержание XCM40170DLMT2CXP

Отзывы:

Похожие инструкции для XCM40170DLMT2CXP

Бренды по названию

Популярные бренды

NED XCM40170DLMT2CXP, Руководство пользователя

Результаты поиска

Содержание XCM40170DLMT2CXP

Отзывы:

Похожие инструкции для XCM40170DLMT2CXP

Бренды по названию

Популярные бренды