Necta Korinto UL, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 56

© by N&W GLOBAL VENDING SpA
16
07 06 274 -00
Notes on programming
The machine electronic control allows or not the use of
many functions:
All of the available functions are described in the machine
program, including the ones that are not used for the
specific configuration of the model (layout).
The machine is supplied with a dose table, describing the
different functions and layouts available for the specific
model.
Below is listed a summary explanation of the main func-
tions useful for managing the operation of the machine, not
necessarily in the order in which they are displayed in the
menu.
The software version can be updated using the specific
systems (PC, Flash, UpKey etc.).
The displayed massages indicating the operation being
carried out are fixed, while the instructions requiring an
action from the user are blinking.
POWER ON
Each time the machine is energised, the display presents
the list of controls to be performed before starting the
machine, and namely:
Tubing (nozzles etc.)
Mixers
Powder feeder
Coffee shutter
For all controls the request “Confirm?” is indicated on the
display.
Press any selection button to continue.
The function of presenting the list of preliminary controls
can be disabled from the programming menu.
At the end of the power on cycle, the display indicates the
software version number.
After a few seconds the display shows the message:
Korinto ES
REV 1.0
SELECT THE DRINK
DRINK SELECTED
SELECT THE DRINK
Credit= 0.50
The machine can be programmed for displaying, for a few
second, the number of selections made.
Then a boiler control routine is run, wich must be confirmed
by pressing any selection button (only for models with water
supply from internal tank):
Ready for use
SELECT THE DRINK
BOILER CONTROL
Confirm?
After making the first selection the machine performs a
coffee unit rotation before starting to prepare the drink.
OPERATING MODES
The machine can be in three different operating modes.
According to the operating mode, the buttons take on
different functions.
The available operating modes are as follows:
FUNCTIONS
Normal operating mode
Coins accepted
products dispensed
Filler menu
Test dispensing
machine maintenance
Technician menu
Programming
different parameters
NORMAL OPERATING MODE
During the normal operating mode the display shows the
message for the user with the prompt to select the drink.
The function of the buttons can be different according to
the layout and to the choices made during programming.
When inserting coins or a payment system, the avail-
able credit is displayed.
During the drink dispensing, also a status bar is shown,
indicating the drink preparation status.