P250U00
11-2005
Technician Menu
2. SET PARAMETERS
BDV
Accepted coins
Accepted coins
Accepted coins
Accepted coins
Accepted coins
It is possible to define which, among the coins recognised by the
validator, are to be accepted.
Check the label on the coin mechanism for the correct coin to
value matching, indicating the position of the coins.
Non accepted coins
Non accepted coins
Non accepted coins
Non accepted coins
Non accepted coins
This function programs the rejection of coins when in “exact
amount” mode.
Check the label on the coin mechanism for the correct coin to
value matching, indicating the position of the coins.
Dispensing buttons
Dispensing buttons
Dispensing buttons
Dispensing buttons
Dispensing buttons
This function enables or not the buttons on the coin mechanism
used to release the coins in the change return tubes.
Value of “exact amount”
Value of “exact amount”
Value of “exact amount”
Value of “exact amount”
Value of “exact amount”
This value defines the combination of empty coin tubes, setting
the coin mechanism in “exact amount” mode. The possible com-
binations of empty coin tubes are indicated below.
For greater simplicity, the combination is described with refer-
ence to tubes A, B and C, where tube A receives the lower value
coins and tube C the greater value coins.
0
=
A or (B and C)
1
=
A and B and C
2
=
A and B only
3
=
A and (B or C)
4
=
A only
5
=
A or B (default) only
6
=
A or B or C
7
=
A or B only
8
=
A or C only
9
=
B and C only
10
=
B only
11
=
B or C only
12
=
C only
C.P.C. device
C.P.C. device
C.P.C. device
C.P.C. device
C.P.C. device
It dialogues with the coin mechanism if devices are installed or
removed from the serial interface (C.P.C.-type devices - the moni-
toring unit is always enabled by default).
Minimum level of tubes
Minimum level of tubes
Minimum level of tubes
Minimum level of tubes
Minimum level of tubes
It brings forward the “Insert exact amount” message for the user,
by adding a number of coins between 0 and 15 to the pro-
grammed number of coins, to set the “full change tubes” status.
Free Vend VMC
Free Vend VMC
Free Vend VMC
Free Vend VMC
Free Vend VMC
Most payment systems with the BDV protocol control the free
vend function.
However, there are some payment systems without such func-
tion.
In this case, if free selections are to be dispensed, free vending
must be enabled with VMC (vending machine control, enabled
by default) and the price of the selections must be set to zero.
2.1.2.1 COIN MECHANISM SET.
