Necchi NC-204D Скачать руководство пользователя страница 39

Страница: 39 / 92

Press the desired stitch number directly. (e.g.

117)

The selected stitch displays on the LCD

screen.
Repeat step several times for stitches

combination.
Up to 40 characters can be combined in one

memory module.

Press the memory button to save the stitches

combination, and return to standard sewing

mode. Recall the memorized stitches and

start to sew.

①

Memory button

Attention

The selected stitch will be cleared from the

memory program after closing the machine

if you do not press the memory button

again when you have completed your

selection.

Recalling and sewing the

memorized stitches

Press the memory button to enter the memory

mode, and select the stored memory module

(1 or 2) in the cursor flashing.

Scroll stitch width adjustment button "+" or "-"

repeatedly, the LCD will display the stitches

and the settings that have been stored one by

one.

Содержание NC-204D





























































































Результаты поиска

Содержание NC-204D

Отзывы:

Necchi NC-204D, Инструкция по эксплуатации, Страница: 39 / 92

Результаты поиска

Содержание NC-204D

Отзывы: