Necchi NC-204D Скачать руководство пользователя страница 31

Страница: 31 / 92

Thread cutter button

Press this button after finishing sewing and

the machine will trim the threads.

Needle up/down position button

With the needle up/down position button,

you decide whether the needle stops in the

highest or in the lowest position (i.e. in the

fabric) when you stop sewing.

Note

During sewing, press the needle up/down

position button, it can not to change the

needle position.

Press the button so that the arrow on the LCD

screen points upward and the needle stops

in the highest position. Press the button so

that the arrow points downward, the machine

stops with the needle in the lowest position.

Speed adjustment slider

The speed adjustment slider can control the

sewing speed. To increase the speed, slide

the lever to the right. To decrease the sewing

speed, slide the lever to the left.
The sewing speed can be adjusted without

foot controller.

Pattern group switch button

When machine is turned on, the LED light will

be set at Direct Pattern Group. By pressing

the pattern group switch button, LED light will

move step by step to select the pattern group:
Direct Pattern Group

→

Regular Pattern Group

→

Alphabet Group-Block style

→

Alphabet Group-Script style

→

Alphabet Group-Outline style

→

Содержание NC-204D





























































































Результаты поиска

Содержание NC-204D

Отзывы:

Necchi NC-204D, Инструкция по эксплуатации, Страница: 31 / 92

Результаты поиска

Содержание NC-204D

Отзывы: