Necchi NC-103D Скачать руководство пользователя страница 84

Страница: 84 / 88

Trouble shooting guide

Problem

Cause

Correction

Reference

Upper

thread

breaks

1. The machine is not threaded

correctly.

1. Rethread the upper thread.

2. The thread tension is too tight. 2. Reduce the thread tension (to

lower number).

3. The thread is too thick for the

needle.

3. Select a larger needle size.

4. The needle is not inserted

correctly.

4. Remove and reinsert the

needle (flat side towards the

back).

5. The thread is wound around

the spool holder pin.

5. Remove the reel and wind up

the thread onto the reel.

6. The needle is damaged.

6. Insert a new needle.

Bobbin

thread

breaks

1. The bobbin case is not inserted

correctly.

1. Remove and reinsert the

bobbin case and pull on the

thread.

2. The bobbin case is threaded

wrong.

2. Check both bobbin and bobbin

case if on the correct position.

Skipped

stitches

1. The needle is not inserted

correctly.

1. Remove and reinsert the

needle (flat side towards the

back).

2. The needle is damaged.

2. Insert a new needle.

3. The wrong size needle has

been used.

3. Choose a needle to suit the

thread.

4. The presser foot is not

attached correctly.

4. Check and attach it correctly.

5. The machine is not threaded

correctly.

5. Rethread the upper thread.

Needle

breaks

1. The needle is damaged.

1. Insert a new needle.

2. The needle is not correctly

inserted.

2. Insert the needle correctly (flat

side towards the back).

3. Wrong needle size for the

fabric.

3. Choose a needle to suit the

thread and fabric.

4. The wrong presser foot is

attached.

4. Select the correct presser foot.

5. The needle clamp screw is

loose.

5. Use the screwdriver to tighten

the screw.

6. The presser foot is not

appropriate for the type of

stitch that you sew.

6. Attach appropriate presser foot

for the type of stitch that you

sew.

7. The upper thread tension too

tight.

7. Loosen the upper thread

tension.

Before calling for service, check below trouble shooting guides in advance, if problem

still exist, please contact nearest dealer or local service center.

Содержание NC-103D

























































































Результаты поиска

Содержание NC-103D

Отзывы:

Бренды по названию

Популярные бренды

Necchi NC-103D, Инструкция по эксплуатации

Результаты поиска

Содержание NC-103D

Отзывы:

Бренды по названию

Популярные бренды