Necchi NC-103D Скачать руководство пользователя страница 37

Страница: 37 / 88

Memory program

You can save frequent-use combining stitches for future use, such as names. Since

stored stitches are not lost after the sewing machine is turned off, they can be recalled at

any time.

Note

- Multiple stitch

s selecting from B to D Pattern Groups can be combined and sewn together.

- This machine has 1 program memory and each module can retain 40 units of stitches.
- All the units in the memory can be edited to set it's function such as stitch length, stitch

width and mirror.

- B-Regular Pattern Group number 008-020 can not be memorized.

Combine stitches

Turn the power switch to on ("I").
Press the memory button to enter the

memory mode. The memory screen appears

automatically.

①

Memory button

Press pattern group switch button to select

the pattern group from B to D.

①

Pattern group switch button

Press the desired stitch number directly. (e.g.

023)
The selected stitch number displays on the

LCD screen.
Repeat step several times for stitches

combination.
Up to 40 characters can be combined in one

memory module.

Содержание NC-103D

























































































Результаты поиска

Содержание NC-103D

Отзывы:

Бренды по названию

Популярные бренды

Necchi NC-103D, Инструкция по эксплуатации

Результаты поиска

Содержание NC-103D

Отзывы:

Бренды по названию

Популярные бренды