Necchi NC-103D Скачать руководство пользователя страница 31

Страница: 31 / 88

Needle up/down position button

With the needle up/down position button,

you decide whether the needle stops in the

highest or in the lowest position (i.e. in the

fabric) when you stop sewing.

Note

During sewing, press the needle up/down

position button, it can not to change the

needle position.

Press the button so that the arrow on the LCD

screen points upward and the needle stops

in the highest position. Press the button so

that the arrow points downward, the machine

stops with the needle in the lowest position.

Twin needle button

Press the twin needle button, the LCD screen

will display the twin needle icon.
The machine automatically reduces the

maximum width for the twin needle sewing.

Please refer to "Twin needle" chapter for more

information. (Page 7

)

Press the button again to return to single

needle sewing.

Speed adjustment slider

The speed adjustment slider can control the

sewing speed. To increase the speed, slide

the lever to the right. To decrease the sewing

speed, slide the lever to the left.
The sewing speed can be adjusted without

foot controller.

Содержание NC-103D

























































































Результаты поиска

Содержание NC-103D

Отзывы:

Бренды по названию

Популярные бренды

Necchi NC-103D, Инструкция по эксплуатации

Результаты поиска

Содержание NC-103D

Отзывы:

Бренды по названию

Популярные бренды