47
5. Using On-Screen Menu
Disabling the Cabinet Buttons [Cabinet Button Lock]
This option turns on or off the Cabinet Button Lock function.
NOTE:
• This Cabinet Button Lock does not affect the remote control and the PC Control functions.
• When the cabinet buttons are unlocked, pressing and holding the EXIT button for about 10 seconds will change the setting to
enable.
• Key symbol indicates the Cabinet Button Lock is enabled.
Enabling High Speed Fan Mode [Fan Mode]
This option allows you to select two modes for fan speed: High speed mode and Auto mode.
High ...................... The built-in fans run at a fixed high speed.
Auto ...................... The built-in fans automatically run at a variable speed according to the internal temperature.
When you wish to cool down the temperature inside the projector quickly, select “High”.
NOTE: Select “High” if you continue to use the projector for consecutive days.
Selecting Signal Format [Signal Select]
[Computer]
Allows you to choose “Computer” for an RGB source such as a computer, or “Component” for a component video
source such as a DVD player. Normally select “RGB/Component” and the projector automatically detects a compo-
nent signal. However there may be some component signals that the projector is unable to detect. If this is the
case, select “Component”. Select “Scart” in Computer 1 (Computer on VT47) for the European Scart signal.
[Video & S-Video System Select]
This feature enables you to select composite video standards manually. Normally select “Auto”.
When you select the video standard for Video and S-Video, select the video standard from the pull-down menu.
This must be done for Video and S-Video respectively.
