11
1. Introduction
SOURCE
PIC-MUTE
POWER
ASPECT
SELECT
3
6
4
2
1
8
7
5
9
For VT570/VT47
1. Infrared Transmitter
Direct the remote control toward the remote sensor
on the projector cabinet.
2. MENU Button
Displays the menu for various settings and adjust-
ments.
3. SELECT
왖왔왗왘
/ Volume Buttons
왖왔
: Use these buttons to select the menu of the
item you wish to adjust.
왗왘
: Use these buttons to change the level of a se-
lected menu item. A press of the
왘
button ex-
ecutes the selection. When no menus appear,
these buttons work as a volume control.
4. ENTER Button
Executes your menu selection and activates items se-
lected from the menu.
5. EXIT Button
Pressing this button will return to the previous menu.
While you are in the main menu, pressing this button
will close the menu.
6. SOURCE Button
Press this button to select a video source such as a
PC, VCR or DVD player. Each time this button is
pressed, the input source will change as follows:
VT570
Computer1
→
Computer2
→
Video
→
S-Video
→
Computer1
→
...
VT47
Computer
→
Video
→
S-Video
→
Computer
→
...
7. PIC-MUTE Button
This button turns off the image and sound for a short
period of time.
Press again to restore the image and sound.
8. ASPECT Button
Press this button once to display the Aspect Ratio
select menu. Keep pressing will change aspect ratios.
See page
42
.
9. POWER Button
Use this button to turn the power on and off when the
main power is supplied and the projector is in standby
mode.
To turn on the projector, press and hold this button for
a minimum of two seconds. To turn off the projector,
press this button once to display the confirmation
message and then press the POWER button or EN-
TER button.
