manualshive.com logo in svg

NEC VERSA VXi, Руководство пользователя, Страница: 69 / 181

Поделиться
Скачать
NEC VERSA VXi Скачать руководство пользователя страница 69

3-28   Using the BIOS Setup Utility

5. 

Scan the BIOS Update Diskette for computer viruses.

The diskette is ready for use.

Performing the BIOS Update

Follow these steps to perform the BIOS update.

1. 

Make sure that the computer is operating under AC power and that the power is
off. Insert the BIOS Update diskette into the diskette drive.

2. 

Power on the computer with the diskette in the drive. The computer boots and
automatically loads the utility. A message similar to the following appears:

The NEC BIOS Update Utility should not be used to modify the BIOS in a Versa
system which is docked. If your Versa is docked, please exit the BIOS Update
Utility, power down, and undock your Versa before running the utility. Plug in your
AC cable before restarting the flash utility.

3. 

Press 

Enter

 to continue.

The utility checks the currently installed BIOS version and the diskette’s BIOS
version. The Main menu appears.

4. 

Use the arrow keys to highlight the “Display BIOS Version” option on the Main
Menu. Use this option to check the currently installed BIOS version and the
version of the new replacement BIOS.

Press any key to return to the Main menu.

5. 

Highlight the “Install New BIOS” option and press 

Enter

.

6. 

Press 

Y

 and then press 

Enter

. After a brief pause, a message appears telling you to

remove the diskette from the drive.

7. 

Remove the diskette and press any key to continue. The utility updates the BIOS.

Power off your computer. The next time you power on your computer, you will
have the latest NEC Versa VXii computer BIOS revision level.

8. 

Enter Setup to restore the default parameter settings.

9. 

Be sure to modify any custom settings that you may have configured.

Содержание VERSA VXi






















































































































































































Отзывы:

Нет отзывов