background image

6   Glossary

 resolution
 

The degree of screen image clarity. Video display resolution is determined by the number of
pixels on the screen. Resolution is usually specified in pixels by scan lines, for example,
640 by 480. See pixels.

 RS-232C
 

Standard interface for serial devices.

S

 scanner
 

An optical device that reads printed material and converts it to a computer screen image.

 serial interface
 

An interface that communicates information one bit at a time.

 serial printer
 

A printer with a serial interface.

 software
 

Programs that run on a computer, such as operating systems, word processors, and
spreadsheets.

 super video graphics array (SVGA)
 

A color bit-mapped graphics display standard, that provides a resolution of 1024x 768 with
up to 256 colors displayed simultaneously.

 system board
 

The main printed circuit board inside the system unit into which other boards and major
chip components, such as the system microprocessor, are connected.

T

 TFT
 

Thin Film Transistor. A type of NEC Versa LCD color screen that supports 256 colors and
provides exceptional screen display.

V

 VersaGlide

A small, touch-sensitive pad used as a pointing device on your NEC Versa notebook
computer. With the VersaGlide, you can move your finger along the pad to move the cursor
or simulate a mouse click by tapping the pad.

 VGA
 

Video Graphics Array. Graphics technology that supports up to 256 K colors and a graphics
resolution of 640 by 480 pixels.

 volatile memory
 

Storage media that loses its data when system power is turned off. Standard memory and
memory that you add to the NEC Versa are volatile memory. See nonvolatile memory.

Содержание VERSA VX











































































































Отзывы: