NEC VERSA VX, Инструкция по обслуживанию и справочник

Страница: 41 / 106

System Configuration and Setup 2-21
HDPREPEZ Utility
Using the HDPREPEZ utility automatically configures your NEC Versa’s system’s save-to-file
(STF) area on the hard disk drive.
Note
For more details about the HDPREPEZ utility, see the HDPREPEZ.TXT file in the
NECUTILS/HDPREP directory.
Using the HDPREPEZ Utility
In Windows 98 or 95, run the HDPREPEZ utility if you increase the memory capacity in your
NEC Versa beyond the factory installed base memory.
Follow these steps to run the HDPREPEZ utility.
1. Power off and restart your NEC Versa.
2.
At the statement “Starting Windows 98 (or 95),” press
F8
.
3. From the Startup menu, select the “Safe Mode Command Prompt Only” option.
4.
Enter MS-DOS. At the c: prompt, type
cd \necutils\hdprep
and press
Enter
to change to
the \necutils\hdprep directory.
5. Type HDPREPEZ and press Enter . The utility automatically prepares your NEC Versa for
the newly installed memory.
6. Power off your system and then power on. A file, large enough to accommodate your
system’s memory is created on the hard disk drive.
Application and Driver CD
Use the Application and Driver CD to install applications, drivers, utilities, Internet browsers,
and the online NEC Info Center.
Launching the Application and Driver CD
Follow these procedures to launch the Application and Driver CD using NEC Customize.
Windows 98 and Windows 95 Environments
1.
Insert the Application and Driver CD into the CD-ROM drive.
2. Double click the NEC Customize icon, if necessary.
3.
Highlight Launch Application and Driver CD.
4. Click launch.
The Application and Driver CD dialog box appears.
Windows NT Environment
1. Insert the Application and Driver CD into the CD-ROM drive.
2.
Double click the NEC Customize icon.
3. Select Launch Application and Driver CD.
4.
Click Install to launch the CD.
The Application and Driver CD dialog box appears.