NEC VERSA VX, Руководство пользователя

Страница: 64 / 173

3-24 Using the BIOS Setup Utility
6.
Press
Y
and then press
Enter
. After a brief pause, a message appears telling you to
remove the diskette from the drive.
7.
Remove the diskette and press any key to continue. The utility updates the BIOS.
Power off your computer. The next time you power on your computer, you will
have the latest NEC Versa VX computer BIOS revision level.
8. Enter Setup to restore the default parameter settings.
9. Be sure to modify any custom settings that you may have configured.
Identifying the Switch Settings
A six-position dip switch is located on the bottom of the system. The switch is
accessible by removing the access panel beneath the CD-ROM drive. The following
list identifies each switch setting and its function.
!
Switch 1, Password override — The default setting is “OFF.” If you forget your
password and cannot access the data on your NEC Versa, change the setting to
“ON” and your current password is erased.
!
Switch 2 — Keyboard select; Default is “ON” for U.S. 85 key keyboard.
! Switch 3 — Reserved for factory use; Default is “ON.”
!
Switch 4 — Keyboard select; Default is “ON” for U.S. 85 key keyboard.
!
Switch 5 — Password enable; Default is “OFF” (Personal Code Setting utility).
!
Switch 6 — Logo select; Default is “OFF” for U.S.
Default switch settings