manualshive.com logo in svg

NEC VERSA VX, Руководство пользователя

Поделиться
Скачать
NEC VERSA VX Скачать руководство пользователя страница 108

Using External Devices   8-3

Parallel Devices

To install a parallel device such as a printer, you need a cable with a male 25-pin
connector for the system and, for most parallel printers, a Centronics

®

-compatible 36-

pin connector.

Note   

When you connect a printer, be sure to install the appropriate printer driver

through the Windows control panel.

Connect a parallel device to your NEC Versa as follows.

1. 

Check that power to both the NEC Versa and the device is off.

2. 

Align and connect the 25-pin parallel cable connector to the parallel port on the
system. Secure the cable with the screws provided.

3. 

Align and connect the other end of the cable to the parallel port on the device.
Lock the connector clips.

Connecting a parallel printer

4. 

Connect the power cable to the device and a properly grounded wall  outlet.

5. 

Turn on power to the system and the device.

Note   

Check that the device is online before you try to use it. See the instructions

that came with the device for more information.

Содержание VERSA VX














































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды