manualshive.com logo in svg

NEC VERSA VX, Руководство пользователя

Поделиться
Скачать
NEC VERSA VX Скачать руководство пользователя страница 147

Frequently Asked Questions   C-3

PC Cards

In which slots do my PC cards go?

Your PC cards can go into either slot if they are NEC-approved cards.

Other software may not support the use of both slots. Type III cards only fit in the
bottom slot (slot 0).

Is there any instance when a modem or network card is only

supported in one slot?

This could be true in cases where the PC card firmware is being upgraded.

Read the release notes that accompany the upgrade.

Can I run two of the same type cards simultaneously?

Yes, Windows 98 or 95 configures each card. If they are both modems,

configure each for a different Com port and different available interrupts under the
ports icon in the Windows control panel or from Device Manager in Windows 98 or 95.

CardWizard for NT will assist in configuring PC cards in the Windows NT
environment. Configure each modem for a different Com port and different available
interrupts using the Modem icon (Install Modem Wizard) in the Control Panel.

Содержание VERSA VX














































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды