NEC VERSA TXI, Руководство пользователя

Страница: 28 / 181

Getting Started 2-5
2.
Plug one end of the AC power cable into the AC adapter and the other end into a
properly grounded 120- or 240-volt, 50- or 60-Hz wall outlet.
Connecting the AC adapter
A – AC Power Port C – Power Cable
B – AC Adapter
Do not cover or place objects on the AC adapter. Keeping the
adapter clear of objects lets the adapter cool properly during use.
Only use the AC adapter that comes with your NEC Versa TXi. Although other adapters
look similar, using them can damage your system.
Powering On Your System
Power on the system as follows:
1.
Locate the latch on the front of the LCD panel, slide it to the right, and raise the
panel.
2.
Locate the Power button and press it to turn on system power. For additional
information about Power control buttons and power LEDs, refer to Chapter 1,
“Introducing Your NEC Versa.”
Note
When powering on your NEC Versa running the Windows 2000 operating
system, you may encounter a warning message suggesting that a problem exists with
the hibernation file on your system. The warning message is inaccurate. To disable this
message, simply enable hibernate support. See the section, “Windows 2000 Hibernate,”
in Chapter 3, for details about enabling hibernate support.