NEC VERSA SXI, Инструкция по обслуживанию и справочник

Страница: 38 / 104

2-18 System Configuration and Setup
Peripheral Setup
The Peripheral Setup menu displays the connection locations between the system and the
Input/Output (I/O) ports and lets you specify different port assignments as needed.
Peripheral Setup
Parameter Default Setting Alternate Setting(s)
USB Controller Enabled Disabled
Internal Hard Drive Both Disabled, Primary,
Secondary
Serial Port Auto Disabled
COM1,IRQ4/COM2,IRQ3
COM3,IRQ4/COM4,IRQ3
Parallel Port Auto Disabled/LPT1/LPT2
Parallel Mode Bi-Dir Uni-Directional/ECP/EPP
IR Serial Port Disabled Auto
COM2,IRQ3/COM3,IRQ4/
COM4,IRQ3
Note
If you disable a device in Peripheral Setup, you cannot enable or assign it using the
Windows device manager. The device will not be listed in the Windows device list. To control the
device using the Windows device manager, select any setting other than Disabled in Peripheral
Setup.
Peripheral Setup allows you to define the following functions.
!
USB Controller — Enables or disables the USB controller.
!
Internal Hard Drive — Enables or disables the IDE controller.
!
Serial Port — Disables the port or changes its IRQ and COM port assignment.
!
Parallel Port/Parallel Mode — Enables, disables, or reassigns the parallel port and selects a
parallel port mode.
!
IR Serial Port — Enables, disables or reassigns the IR serial port.
Other BIOS Setup Options
BIOS Setup offers other options, including the following:
!
Change Language Setting — Controls the BIOS setup language display. English and French
are the available options.
!
Refresh Battery — Launches the Refresh Battery utility. Once launched, the utility fully
discharges your battery to eliminate any residual memory effect. Once refreshed, your
battery is conditioned to recharge to its full capacity. To recharge the battery, connect your
NEC Versa to AC power. This process may take up to four hours to complete.
!
Auto Configuration with Defaults — Loads default settings.
!
Save Settings and Exit — Accepts changes made to current settings, saves to CMOS, and
exits BIOS Setup.
!
Exit Without Saving — Reverts to previously selected settings and exits Setup.