NEC VERSA SXI, Инструкция по обслуживанию и справочник

Страница: 50 / 104

Disassembly and Reassembly 3-7
Mini-PCI LAN/Modem
Remove the mini-PCI LAN/ Modem card as follows.
1.
Remove the memory module bay screw and cover.
2.
Disconnect the mini-PCI LAN/modem cable from the main board.
3.
Remove the mini-PCI LAN/modem card as follows:
!
Press the locking tabs away from the sides of the card and hold while gently lifting on
the edge of the card.
!
When the edge of the card pops up and is at approximately a 60 degree angle, pull the
card from the socket.
Removing the mini-PCI LAN/modem
A – Locking Tabs C – Connector CN25 on Main Board
B – Connector CN24 on Main Board D – System Board Visible Through Bay
Keyboard
Follow these steps to remove the keyboard.
1.
Turn the system over and open the LCD panel.
2.
Locate the two keyboard retainers, press and slide each one towards the outside edge of the
system. Remove the retainers.
Removing the keyboard retainers