NEC VERSA SXI, Инструкция по обслуживанию и справочник

Страница: 23 / 104

System Configuration and Setup 2-3
Powering On with Windows 2000
If you installed a generic Windows 2000 operating system or disabled hibernate support, a
message about the hibernation file appears at power on. Enable Hibernate support to remove this
message.
Follow these steps to enable Hibernate support:
1.
On the Windows taskbar, click Start, Settings, and Control Panel.
2.
Double click Power Options.
3.
Select the Hibernate tab.
4.
Check the box to enable Hibernate support.
5.
Click OK and close Control Panel.
Main Battery Pack
The NEC Versa comes with a rechargeable Lithium-Ion (Li-Ion) battery pack that’s easy to
install and remove.
To prevent accidental battery ignition or explosion, adhere to the
following:
!
Keep the battery away from extreme heat.
!
Keep metal objects away from the battery connectors to prevent a short circuit.
!
Make sure the battery is properly installed in the battery bay.
!
Read the precautions printed on the battery.
Determining Battery Status
Your NEC Versa system provides tools to help you keep track of the main battery’s power level.
If your system is configured to display the power icon on the taskbar in the Windows
environments, an electrical plug appears when the system is connected to an AC power source.
A battery icon displays when the system is not connected to an AC power source.
Use the system’s power meter to determine battery status. Access the system’s power meter in
the following ways:
!
Move the cursor over the power icon on the taskbar to display the remaining battery power
for the system’s main battery.
!
Right click the power icon on the taskbar to open the power meter or to adjust power
properties.
!
Double click the power icon on the taskbar to display the remaining power for the main
battery.
!
Go to Start, Settings, Control Panel, and double click the Power icon and select the Power
Meter tab.
Systems running the Window NT operating system use SystemSoft’s PowerProfiler™ to
determine battery status. Simply click the battery icon on the taskbar to launch the PowerProfiler
battery page.