Using the MediaDock 2000 4-7
AUDIO CDs
This section describes how to play an audio CD from Win-
dows for Workgroups and Windows 95.
Using Audio CDs under Windows for Workgroups
To use audio CDs under Windows for Workgroups, you
must first load audio drivers as described in the following
steps. Then see the section that follows on playing the CD.
Adding the CD Audio Option
Add the “CD Audio” option to the Media Player’s Device
list as follows.
1.
Press the Stop/Eject button and insert an audio CD into
the tray. Press the button again so the tray retracts into
the reader.
2.
From the Program Manager, select the Main program
group. Double click the Control Panel icon.
3.
Double click the Drivers icon and select “Add.”
4.
Scroll through the list of drivers and highlight
[MCI] CD
Audio
. Click “OK.”
If you see the prompt that the mcicda.drv is already on
the system, select “New.”
5.
Click “OK” in the CDROM drive detection window.
Click on the “Close” button to close the Drivers window.
6.
Close the Control Panel.
You only need to add the CD Audio option once. After
doing so, go to the next section to play audio CDs.
