Setting Up and Using the Software 3-5
12.
Go to the following section “Choosing a Configura-
tion”, for steps on using the Mobile/Docked configura-
tion menu that appears after the computer reboots.
Choosing a Configuration
After setting up the MediaDock 2000 software, your NEC
Versa boot-up differs from its original procedure. The new
boot up sequence lets you choose either a docked or mobile
configuration.
Use the new boot up procedure as follows:
1.
Power on your NEC Versa 2000 computer as you would
normally. A menu similar to the following is displayed.
1. MediaDock 2000 Configuration
2. Mobile Configuration
2.
Enter the appropriate number for the configuration you
want to use as follows:
MediaDock 2000 Configuration — Use this configu-
ration when you dock your NEC Versa 2000 com-
puter on your MediaDock 2000.
Mobile Configuration — Select this configuration to
use your NEC Versa 2000 computer by itself.
Your MediaDock 2000 software installation is complete. Go
to Chapter 4, “Using the MediaDock 2000” for instructions
on operating your MediaDock 2000.
