NEC VERSA 6000 Series, Руководство пользователя

Страница: 53 / 158

3-4 Using Setup
Checking/Setting System Parameters
See the following table for a list of parameters, their factory default settings,
and alternate settings. As you set each parameter, its available settings are
explained in the Item-Specific Help area in the right part of the screen.
Reset the parameters on the displayed screen to their factory default settings
by pressing
F9 . Or, reset all parameters by selecting Set Default Values on
the Exit screen. Also, read “PowerPanel” near the end of this chapter for in-
formation on using a customized toolbar to change system settings with the
click of an icon.
NOTE
The internal modem is not available in Asia and Europe. The
modem settings listed below do not apply to Asia and Europe.
Setup Parameters
PARAMETER
DEFAULT
SETTING ALTERNATE
SETTINGS
Main
System Time
System Date
Diskette Drive A
Diskette Drive B
HR:MIN:SEC
MO/DAY/YEAR
1.44MB, 3.5"
Not Installed
1.2MB, 5.25"/Not Installed
1.44MB, 3.5"/1.2MB, 5.25"
Internal Hard Drives
Master Enable
Auto Disable
BIOS Defined/None/CD/
User
Slave None BIOS Defined/Auto/CD/
User
Docking Station Hard Drives*
Docking Station Master*
Docking Station Slave*
Boot Docking Station IDE*
+
System Memory
Extended Memory
Disable
None
None
No
640K
15360KB
Enable
BIOS Defined/Auto/CD/
User
BIOS Defined/Auto/CD/
User
Yes
19456KB (w/4MB card)
23552KB (w/8MB card)
39936KB (w/16MB card)
47004KB (+32MB card)