4-42 Using Your NEC Versa 6000
3.
Locate switch 1 on the four-position dip switch in the hard disk drive
bay.
Locating the switch settings
4.
Set the switch to “off” to enable BIOS reprogramming.
5.
Replace the hard disk drive and the compartment cover.
Now you are ready to begin the actual update procedure using the follow-
ing steps.
6.
Make sure that the computer is operating under AC power, and that the
power is off. Insert the BIOS Update diskette into diskette drive A.
7.
Power on the computer with the diskette in drive A. The computer boots
and automatically loads the utility. A message similar to the following
appears:
FLASH ROM EQUIPPED
WARNING: The BIOS Update Procedure
is about to begin, press ENTER to continue.
To abort, remove the diskette and reset the unit.
8.
Press
Enter
to continue.
Содержание VERSA 6000 Series
Страница 9: ...viii Contents ...