7-4 Solving Problems
POST Error Messages
MESSAGE
WHAT TO DO
Non-system disk or
disk error; Replace
and press any key
when ready
Remove the diskette from drive A and press any
key to start the system from the hard disk.
Or, insert a bootable disk in drive A and press
any key.
Operating System Not
Found
or
Fixed Disk Failure 0
Press
F2
to start Setup. Change the hard disk type to
the correct setting. Exit and save Setup changes.
Invalid configuration
information – run Setup
program
One or more system configuration parameters
are not properly set. Start Setup, set them correctly,
and exit and save to update the parameters.
Real time clock
failure
Set time and date using Setup. Exit and save to
update the parameters.
Time-of-day not set –
run Setup
Set the time and date using Setup. Exit and save
Setup changes to update the parameters.
System CMOS
Checksum Bad – run
Setup
or
Press (F1) to resume,
(F2) to setup.
Press F2 to enter Setup. Under Exit, set the default
values. Under Main, set the date and time. Save
your changes and exit.
Fixed disk configuration
error
Start Setup. Exit and save to update the parameters.
Check to see if the hard disk connector is seated
properly. If there is still a problem, the hard disk
might need repair.
Fixed disk failure
Press F2 to start Setup. Exit and save to update the
parameters.
Check to see if the hard disk connector is seated
properly.
If there is still a problem, the hard disk might need
repair.
Fixed disk controller
failure
Press F2 to start Setup. Exit and save to update the
parameters.
Check to see if the hard disk connector is seated
properly.
Содержание VERSA 6000 Series
Страница 9: ...viii Contents ...