NEC UPD98413 Скачать руководство пользователя страница 78

Страница: 78 / 317

CHAPTER 3 FUNCTIONAL OUTLINE

PRELIMINARY

NEC confidential and Proprietary

(4) Transmitting Line RDI (Line Remote Defect Indication)

Line RDI is a signal that reports detection of a line receive failure (LOS, LOF, or Line AIS) to a unit in the

upstream.

••••

Transmitting/Terminating

method

The Line RDI frame can be transmitted in the following three ways. The frame is transmitted or cleared by

observing the boundary of the frame.

<1>

Automatic return transmission

The Line RDI frame is automatically transmitted if any of the events of LOS, LOF, and Line AIS is

detected at the reception side. When the

PD98413 has recovered from the event, it resumes

transmitting the ordinary frame, but

PD98413 guarantees to generate the Line RDI frame for at least 20

frames. This function is enabled in the default mode, but can be disabled by using the ALRDIM bit of the

MDLOHT register.

<2>

Set the LRDI bit of the CMALM register to 1. While this bit is set to 1, the Line RDI frame is transmitted.

<3>

Drive the TALM pins to the Line RDI code. While these pins are set to the Line RDI code, the Line RDI

frame is transmitted.

••••

Line RDI frame

This frame has "110" in bits 6 to 8 of the K2 byte of the OH byte.

(5) Transmitting Path RDI (Path Remote defect Indication)

Path RDI is a signal that reports detection of a path receive failure to a unit in the upstream.

PD98413 supports

two modes of One-bit RDI and Enhanced RDI. This mode can be selected by the PRDIM bit of the MDPOHT

One-bit Path RDI

••••

Transmitting/Terminating

method

The One-bit Path RDI frame can be transmitted in the following three ways. The frame is transmitted or

cleared by observing the boundary of the frame.

<1>

Automatic return transmission

The One-bit Path RDI frame is automatically transmitted if any of the events of LOS, LOF, Line AIS, LOP,

Path AIS, and (LCD) is detected at the reception side.

When the

PD98413 has recovered from the event, it resumes transmission have the ordinary frame

(Bit5 of G1 byte is “0”), but

PD98413 guarantees to generate the One-bit Path RDI frame for at least 20

frames. This function is enabled in the default mode, but can be disabled by using the APRDIM bit of

the MDPOHT register. LCD is not included in the condition of automatic transmission of the One-bit

Path RDI in the default mode, but can be included in the condition by using the LCDO bit of the

MDPOHT register.

<2>

Set the PRDI field of the CMALM register to 001. While this field is set to 001, the One-bit Path RDI

frame is transmitted.

<3>

Drive the TALM pins to the One-bit Path RDI code. While these pins are set to the One-bit Path RDI

code, the One-bit Path RDI frame is transmitted.

••••

One-bit Path RDI frame

This frame has "1" in bit 5 of the G1 byte of the OH byte.

Содержание UPD98413






























































































































































































































































































































Результаты поиска

Содержание UPD98413

Отзывы:

Похожие инструкции для UPD98413

Бренды по названию

Популярные бренды

NEC UPD98413, Руководство пользователя

Результаты поиска

Содержание UPD98413

Отзывы:

Похожие инструкции для UPD98413

Бренды по названию

Популярные бренды